Alumina G 1000um 10x20cm (25 plates/box) P03023

Preparative TLC plates have adsorbent layers thicker than the 250 micron layers normally used for analytical separations. Thus, preparative plates can be used for separation of larger quantities of materials.  The loading capacity for a given degree of sample component resolution increases roughly as the square root of the increased adsorbent layer thickness. In preparative TLC, materials to be separated are often applied as long streaks rather than spots.

 Features and Benefits

• After development, specific compounds may be recovered by scraping the adsorbent layers from the plate in the region of interest and eluting the separated material from the adsorbent using a strong solvent. ·
• Thicker layers for higher capacity
• Full range of plate sizes
• Prep-scored option for convenient zone location

Discover Our Soft Layer Plates

 Available with preadsorbent sample loading zone Calcium sulfate binder-soft layer for easy scraping Using a slurry containing calcium sulfate hemihydrate as a binder,these plates are analogous to Silica

Gel G UNIPLATES, but with aluminum oxide as the adsorbent. The pH is neutral to slightly basic. Coatings are available in both analytical and preparative thicknesses.